Tailgate Trim Panel

Tailgate Trim Panel

Removal





1 Remove the tailgate upper trim panel.
- Remove the 4 screw covers.
- Remove the 4 screws.
- Release the 2 clips.




2
CAUTION: To protect the paintwork, the tailgate must be supported at all times.
Release the 2 support cables from the tailgate.
- Release the 2 clips.
3 Remove the 2 support cable spigots from the tailgate.
4 Lift the tailgate hinge cover for access.




5 Remove the tailgate trim panel.
- Release from the 12 clips.




6
NOTE:
Do not disassemble further if the component is removed for access only.
Remove the 12 clips from the tailgate trim panel.

Installation
1 Install the tailgate trim panel.
- Install the clips.
2 Lower the tailgate hinge cover.
3 Tighten the support strut spigot to 25 Nm (18 lb.ft).
4 Position the support cables to the tailgate and secure with the clips.
5 Install the tailgate upper trim panel.
- Secure with the clips.
- Install the screws.
- Install the screw covers.