Front Cross-Member: Service and Repair

Front Crossmember

Removal
1 Disconnect both battery cables. For additional information, refer to Specifications Service and Repair
2 Remove the hood latch panel. For additional information, refer to Hood Latch Panel Service and Repair
3 Remove the radiator. For additional information, refer to Radiator
4 Remove both front impact sensors. For additional information, refer to Front Impact Severity Sensor Front Impact Severity Sensor
5 Release wiring harness from crossmember
6 Remove the fender moulding. For additional information, refer to Fender Moulding




7





8 For additional information:
- Welding. For additional information, refer to Body Repairs
Corrosion protection. For additional information, refer to Corrosion Protection
Tolerance checks. For additional information, refer to Body and Frame

Installation
1 Install is the reversal of removal.