Third Row Seat
Third Row Seat
Removal
NOTE:
Third row seats must be removed as a pair.
1 Remove the loadspace compartment anchors.
- Remove the 4 Torx bolts.
2 Remove the loadspace trim panels.
- Release from the 4 clips.
3
NOTE:
Torx bolts may be re-used.
Remove the third row seats.
- Release the trim cover.
- Remove the 10 Torx bolts.
4
NOTE:
Do not disassemble further if the component is removed for access only.
Separate the third row seats.
- Remove the seat frame finisher.
- Drill out the 6 rivets.
- Remove the 2 brackets.
Installation
1 Attach the third row seats.
- Install the brackets.
- Install the rivets.
2 Install the third row seats.
- Tighten the Torx bolts to 40 Nm (30 lb.ft).
- Secure the trim cover.
3 Install the loadspace trim panels.
- Secure in the clips.
4 Install the loadspace compartment anchors.
- Tighten the Torx bolts to 25 Nm (18 lb.ft).