Coolant Level Sensor: Service and Repair

Engine Coolant Level Switch

Removal





1 Release the power steering fluid reservoir from the bracket.




2 Release the windshield washer reservoir filler neck.




3 Reposition the coolant expansion tank.
- Remove the 2 bolts.




4 Remove the engine coolant level switch.
- Disconnect the engine coolant level switch electrical connector.

Installation
1
NOTE:
An audible click can be heard when the engine coolant level switch is correctly installed.
Install the engine coolant level switch.
- Connect the engine coolant level switch electrical connector.
2
CAUTION: Make sure that the component is correctly located on the locating pegs.
Secure the coolant expansion tank.
- Tighten the bolts to 10 Nm (7 lb.ft).
3 Secure the windshield washer reservoir filler neck.
4 Secure the power steering fluid reservoir to the bracket.