Fog/Driving Lamp: Service and Repair

Front Fog Lamp

Removal





1
NOTE:
Release each clip individually. Clips may fall off if care is not taken.
Remove the front fog lamp bezel.
- Release the 6 clips.




2 Release the front fog lamp.
- Remove the 3 screws.




3 Remove the front fog lamp.
- Disconnect the front fog lamp electrical connector.

Installation
1 Connect the front fog lamp electrical connector.
2 Install the front fog lamp.
- Tighten the screws.
3 Install the front fog lamp bezel.
- Secure the clips.
4 Check the fog lamp beam alignment.