Headlamp: Adjustments
Headlamp Adjustment
NOTE:
With self leveling suspension, make sure the vehicle is at the standard ride height.
NOTE:
The headlamp setting is 1.2 % below horizontal and parallel.
NOTE:
NAS vehicles have vertical adjustment only.
1 Align the headlamp beam setting equipment to one headlamp.
2 Switch the headlamps on and to dipped beam.
3
NOTE:
NAS vehicles have vertical adjustment only.
Adjust the headlamps with a Phillips screwdriver.
- Rotate the adjusters A and B by an equal amount for vertical alignment.
- Rotate the adjusters A or B for horizontal alignment.
4 To adjust the second headlamp, repeat the above procedure.