Operation CHARM: Car repair manuals for everyone.

Rear Outer Parking Aid Sensor





Rear Outer Parking Aid Sensor

Removal
1
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.




2 Release the 5 exhaust hangers.
- Support the exhaust assembly.




3 Remove the parking aid sensor.
- Disconnect the electrical connector.
- Release the 2 clips.




4 Remove the parking aid sensor trim panel.
- Release the 3 clips.

Installation
1 To install, reverse the removal procedure.