Air Bag Deactivation Switch: Service and Repair

Passenger Air Bag Deactivation (PAD) Switch

Removal
1 Make the SRS system safe. For additional information, refer to Standard Workshop Practices Standard Workshop Practices
2 Remove the passenger side register trim panel. For additional information, refer to Passenger Side Register Trim Panel Passenger Side Register Trim Panel




3 Remove the PAD switch.
- Disconnect the electrical connector.
- Release the 2 clips.

Installation
1 Install the PAD switch.
- Connect the electrical connector.
- Secure with the clips.
2 Install the passenger side register trim panel. For additional information, refer to Passenger Side Register Trim Panel Passenger Side Register Trim Panel