Seat Occupant Sensor: Service and Repair

Occupant Classification Sensor

Removal

NOTE:
The occupant classification sensor is part of the passenger seat cushion. The sensor is only fitted to NAS models.
1 Disconnect the battery ground cable. For additional information, refer to Specifications Service and Repair
2 Remove the front seat cushion cover. For additional information, refer to Front Seat Cushion Cover Front Seat Cushion Cover

Installation
1 Install the front seat cushion cover. For additional information, refer to Front Seat Cushion Cover Front Seat Cushion Cover
2 Connect the battery ground cable. For additional information, refer to Specifications Service and Repair
3 Using T4, configure a new occupant classification sensor.