Starter Solenoid: Service and Repair

Starter Solenoid

Removal
1 Remove the starter motor. For additional information, refer to Starter Motor Service and Repair




2 Release the starter motor terminal cover.




3 Release the starter motor terminal.
- Remove the nut.




4 Remove the starter motor bolts.




5
CAUTION: Make sure the starter motor armature remains located inside the motor housing.
Remove the starter motor from the gear housing.




6 Remove the starter solenoid screws.




7
CAUTION: Make sure the gears and bearings remain located in the gear housing.
Remove the starter solenoid.

Installation
1
CAUTION: Make sure the gears and bearings remain located in the gear housing.
Fit the starter solenoid to the gear housing.
2 Fit the starter solenoid screws.
- Tighten to 10 Nm (7 lb.ft).
3 Install the starter motor to the gear housing.
4 Install the starter motor bolts.
- Tighten to 10 Nm (7 lb.ft).
5 Secure the starter motor terminal.
- Tighten the nut to 5 Nm (4 lb.ft).
6 Secure the starter motor terminal cover.
7 Install the starter motor. For additional information, refer to Starter Motor Service and Repair