Headliner: Service and Repair

Headliner

Removal
1 Remove both A-pillar upper trim panels. For additional information, refer to A-Pillar Trim Panel Pillar Trim
2 Remove both B-pillar upper trim panels. For additional information, refer to B-Pillar Upper Trim Panel B-Pillar Upper Trim Panel
3 Remove both C-pillar upper trim panels. For additional information, refer to C-Pillar Upper Trim Panel C-Pillar Upper Trim Panel
4 Remove both D-pillar upper trim panels. For additional information, refer to D-Pillar Trim Panel D-Pillar Trim Panel




5 Remove the front overhead console.
- Carefully release the 7 clips.
- Disconnect the 3 electrical connectors.




6 Remove the rear overhead console.
- Carefully release the 9 clips.
- Disconnect the 2 electrical connectors.




7 Disconnect the RH A-pillar electrical connector.




8 Remove the sun visor.
- Remove the cover.
- Remove the 2 screws.
- Release from the clip.
- Disconnect the electrical connector.
- Repeat the above procedure for the other side.




9 Remove the sun visor retaining clip.
- Release the screw cover.
- Remove the screw.
- Repeat the above procedure for the other side.





10 Remove the passenger assist handle.
- Release the 2 screw covers.
- Remove the 2 screws.
- Repeat the above procedure for the remaining 5 handles.

11 Position the front seats fully forward.

12 Position the rear seats fully forward.





13 Remove the rear headliner trim panel.
- Release the 7 clips.
- Disconnect the electrical connector.





14 Disconnect the headliner wiring harness rear electrical connector.





15 With assistance, carefully remove the headliner.
- Release the 14 clips.





16
NOTE:
Do not disassemble further if the component is removed for access only.
Remove the rear interior lamp.
- Release the clip.
- Disconnect the electrical connector.
- Repeat the above procedure for the other side.





17 Remove the headliner wiring harness.

Installation
1 Install the headliner wiring harness.
- Secure the wiring harness to the headliner.
2 Install the interior lamp.
- Secure with the clip.
- Connect the electrical connector.
- Repeat the above procedure for the other side.
3 With assistance, carefully install the headliner.
- Secure with the clips.
4 Connect the headliner wiring harness rear electrical connector.
5 Install the rear headliner trim panel.
- Secure the clips.
6 Reposition the rear seats.
7 Reposition the front seats.
8 Install the passenger assist handles.
- Install the screws.
- Secure the screw covers.
9 Install the sun visors.
- Install the clips.
- Install the screws.
- Install the screw covers.
- Connect the electrical connectors.

10 Connect the RH A-pillar electrical connector.

11 Install the rear overhead console.
- Connect the electrical connectors.
- Carefully secure the clips.

12 Install the front overhead console.
- Connect the electrical connectors.
- Carefully secure the clips.

13 Install both D-pillar upper trim panels. For additional information, refer to D-Pillar Trim Panel D-Pillar Trim Panel

14 Install both C-pillar upper trim panels. For additional information, refer to C-Pillar Upper Trim Panel C-Pillar Upper Trim Panel

15 Install both B-pillar upper trim panels. For additional information, refer to B-Pillar Upper Trim Panel B-Pillar Upper Trim Panel

16 Install both A-pillar upper trim panels. For additional information, refer to A-Pillar Trim Panel Pillar Trim