Rear Seat [Vehicles With: 60/40 Split Seat]

Rear Seat

Removal

NOTE:
This procedure shows the removal and installation of both the LH and the RH seats.




1
NOTE:
The Torx bolts can be re-used.
Release the RH rear seat.
- Fold the LH seat cushion forward.
- Remove the 4 Torx bolts.
- Fold down the rear seat backrest.
2 Remove the RH rear seat.




3
NOTE:
The Torx bolts can be re-used.
Release the LH rear seat.
- Fold the LH seat cushion forward.
- Remove the 6 Torx bolts.
- Fold down the rear seat backrest.
4 With assistance, remove the LH rear seat assembly.

Installation
1 With assistance, install the LH rear seat assembly.
- Position the seat on the dowels.
2 Secure the LH rear seat.
- Return the seat backrest to the upright position.
- Tighten the Torx bolts to 40 Nm (30 lb.ft).
- Fold the seat cushion rearwards.
3 Install the RH rear seat.
- Position the seat on the dowels.
4 Secure the RH rear seat.
- Return the seat backrest to the upright position.
- Tighten the Torx bolts to 40 Nm (30 lb.ft).
- Fold the seat cushion rearwards.