Body - Revised Body Removal/Installation

No.: LTB00278
Issue: 1
Date: 27 APR 2010

SECTION: 502
Revised Workshop Procedure: Body Assembly Remove / Refit





AFFECTED VEHICLE RANGE:

CONDITION SUMMARY:

Situation:
The Workshop Manual procedure for removing and refitting the body assembly has been revised. The revised procedure has several steps removed or re-timed, including but not limited to:

^ Bumper renew (front and rear) has been replaced with bumper remove / refit for access

^ Complete coolant drain has been replaced with a coolant top up as only one (1) liter is lost

^ Shields located under the front wheel arches no longer require removal

^ Steering column repair time has been reevaluated

NOTE:
Associated repair times requiring body removal will also change.

Action:
When removing and refitting the body assembly, refer to the Repair Procedure outlined below.

PARTS:

No parts necessary; information only

TOOLS:

Refer to Workshop Manual (GTR) for any required special tools

WARRANTY:

NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always refer to DDW to obtain the latest repair time.





DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.

Normal warranty policy and procedures apply.

REPAIR PROCEDURE

REMOVE / REFIT BODY ASSEMBLY

NOTE:
Global Technical Reference (GTR) lookup sequence is as follows:

GTR Home > NAS > Model > Service Information > Model Year > Workshop Manual

1. Refer to Workshop Manual (GTR) section 502-02, Full Frame and Body Mounting, to remove / refit the body assembly.