Front Door Panel: Service and Repair

Front Door Trim Panel
This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures How to Use TAS Procedures

Removal





1 Remove the grab handle cover.




2 Remove the front door trim panel.





NOTE:
Do not disassemble further if the component is removed for access only.
3 Remove the puddle lamp.




4 Remove the front door latch remote control handle.




5 Remove the window control switch.




6 Remove the 11 clips.

Installation
1 Install the window control switch.
2 Install the front door latch remote control handle.
3 Install the puddle lamp.
4 Install the clips.
5 Install the front door trim panel.
6 Install the grab handle cover.