Front Seat Armrest

Front Seat Armrest

This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures How to Use TAS Procedures

Removal





1 Raise the seat base for access.




2 Remove the cover.




3 Remove the Torx bolt.




4
CAUTION: Make sure that the seat armrest slot is correctly aligned before removing the seat armrest. Failure to follow this instruction may result in damage to the vehicle.
Remove the seat armrest.
- Raise the seat armrest to the position shown.
- Slide the seat armrest towards the centre of the vehicle.

Installation





1 To install, reverse the removal procedure.
- Tighten the Torx bolt to 10 Nm (7 lb.ft).