Fluid Filter - A/T: Service and Repair

Fluid Pan, Gasket and Filter
This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures How to Use TAS Procedures

Removal
1 Remove the cover and disconnect the battery ground cable.
For additional information, refer to Specifications Specifications

WARNING: Make sure to support the vehicle with axle stands.
2 Raise and support the vehicle.
3 Drain the transmission fluid.
For additional information, refer to Transmission Fluid Drain and Refill Transmission Fluid Drain and Refill
4 Remove the front subframe assembly.
For additional information, refer to Front Subframe





CAUTION: Be prepared to collect escaping oil.
5 Remove the gasket.

Installation
1 For sealant specification, refer to the specifications section.
For additional information, refer to Specifications [1][2]Mechanical Specifications




2 Apply a bead of sealant, 3 mm diameter, to the area indicated.
3 Install the fluid pan.
Torque to: 14 Nm
4 Install the front subframe.
For additional information, refer to Front Subframe
5 Connect the battery ground cable and install the cover.
For additional information, refer to Specifications Specifications
6 Refill the transmission with fluid.
For additional information, refer to Transmission Fluid Drain and Refill Transmission Fluid Drain and Refill