Valve Clearance: Testing and Inspection

Valve Clearance Check

NOTE:
Only the exhaust cam shaft has adjustable tappets.

WARNING: Make sure to support the vehicle with axle stands.
1 Raise and support the vehicle.
2 Remove the cover and disconnect the battery ground cable.
For additional information, refer to Specifications Specifications
3 Remove the camshaft bearing housing.
For additional information, refer to Valve Cover Service and Repair




4 Using the special tools, position and secure the exhaust camshaft.
Special Service Tool




Holder, Camshaft, 303-1235
5 Using the original bolt, install the camshaft sprocket and lightly tighten.
6 For valve clearance data, refer to specifications.
For additional information, refer to Specifications [1][2]Mechanical Specifications




7 Using a feeler gauge, measure the clearance between the camshaft and the valve shim.
8 Remove the camshaft sprocket.
9 Remove the special tools.

10 Install the camshaft bearing housing.
For additional information, refer to Valve Cover Service and Repair

11 Connect the battery ground cable and install the cover.
For additional information, refer to Specifications Specifications