Rear Cross-Member: Service and Repair

Transmission Support Crossmember

Removal

NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.

NOTE:
Removal steps in this procedure may contain installation details.

1.
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

Raise and support the vehicle.





2.





3.





4.





5.

Installation





1. TORQUE: 115 Nm





2. TORQUE: 175 Nm





3. TORQUE: 10 Nm





4. TORQUE: 10 Nm

5. Lower the vehicle.