Front Seat Height Adjustment Motor

Front Seat Height Adjustment Motor

Removal

NOTE:
Front seat height adjustment motor is supplied as part of the front seat frame assembly.
1 Remove the front safety belt buckle. For additional information, refer to Front Safety Belt Buckle
2 Remove the front seat cushion assembly. For additional information, refer to Front Seat Cushion Front Seat Cushion




3 Remove the front seat backrest assembly.
- Release and disconnect the 2 electrical connectors.
- Remove the 4 Torx bolts.




4 Remove the front seat electrical connector bracket.
- Remove the 4 screws.




5 Remove the front seat tilt motor.
- Release the 3 wiring harness clips.
- Remove the 4 Torx bolts.




6 Remove the front seat position sensor.
- Remove the 2 nuts.




7 Remove the front seat height adjustment motor.
- Disconnect the electrical connector.
- Remove the 8 nuts.

Installation
1 Install the front seat height adjustment motor.
- Tighten the nuts to 25 Nm (18 lb.ft).
- Connect the electrical connector.
2 Install the front seat position sensor.
- Tighten the nuts to 4 Nm (3 lb.ft).
3 Install the front seat tilt motor.
- Tighten the Torx bolts to 10 Nm (7 lb.ft).
- Attach the wiring harness.
4 Install the front seat electrical connector bracket.
- Tighten the screws.
5 Install the front seat backrest assembly.
- Tighten the Torx bolts to 25 Nm (18 lb.ft).
- Connect and secure the electrical connectors.
6 Install the front seat cushion assembly. For additional information, refer to Front Seat Cushion Front Seat Cushion
7 Install the front safety belt buckle. For additional information, refer to Front Safety Belt Buckle