Front Seat Manual Height Adjustment Lever

Front Seat Manual Height Adjustment Lever

Removal
1 Remove the drivers side seat slides. For additional information, refer to Seat Track - Vehicles With: Power Seats Seat Track [Vehicles With: Power Seats]
2 Remove the front seat cushion base. For additional information, refer to Front Seat Cushion Front Seat Cushion

5 TORQUE: 25 Nm

6
CAUTION: Tie straps must be fitted, failure to follow this instruction may result in personal injury.
CAUTION: Failure to follow this instruction may cause damage to the vehicle.
Secure the seat base using the 4 tie straps supplied, as shown.
- Using the seat height adjuster, lower the seat base to its lowest position.

7 Release the arm from the height adjuster.
- Remove the Torx bolt.

8 Drill out the 4 rivets.

Installation
1 To install, reverse the removal procedure.