Rear Seat [Vehicles With: 40/20/40 Split Seat]

Rear Seat

Removal





1
NOTE:
The Torx bolts can be re-used.
Release the rear seat.
- Remove the front 2 Torx bolts.
- Fold the seat assembly forwards.
- Disconnect the electrical connector.
- Remove the rear 2 Torx bolts.
2 Remove the rear seat assembly.

Installation
1 Install the rear seat assembly.
2 Secure the rear seat.
- Connect the electrical connector.
- Tighten the rear Torx bolts to 45 Nm (33 lb.ft).
- Fold seat assembly rearwards.
- Tighten the front Torx bolts to 45 Nm (33 lb.ft).