Cooling Fan Belt

Cooling Fan Belt
This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures How to Use TAS Procedures

Removal
1 Disconnect the battery ground cable.
For additional information, refer to Specifications Specifications
For additional information, refer to Cooling Fan Service and Repair





Installation





Special Service Tool




Installer, Stretchy Belt, 303-1500




1 Install the cooling fan belt.
Whilst rotating the engine,
make sure that pressure is applied to the left hand side of the cooling fan belt to aid installation.
Rotate the engine until the special tool has reached the 9 o clock position.
2 Remove the special tool.
3 Rotate the engine clockwise twice, making sure that the belt is seated on both pulleys correctly.
For additional information, refer to Cooling Fan Service and Repair
4 Connect the battery ground cable.
For additional information, refer to Specifications Specifications