Cylinder Head Assembly

Cylinder Head Torque & Sequence / Bolt re-usability Service and Repair








Surface Variation -- Head-to-block, Head-to-manifolds And Surface Variation -- Warpage


Cylinder head maximum permitted warp (mm) (flatness specification) overall 0.08
over 150 x 150 mm area 0.05
over 25 x 25 mm area 0.02

Camshaft Bearing Cap







Camshaft LH

Step 1: Torque to 3 Nm

Step 2: Torque to 12 Nm





Tighten the bolts in the indicated sequence.






Camshaft RH

Step 1: Torque to 3 Nm

Step 2: Torque to 12 Nm





Tighten the bolts in the indicated sequence.


Intake Manifold Specifications

Exhaust Manifold Specifications