Ride and Handling Optimization Switch
Ride and Handling Optimization Switch
Removal
NOTE:
Automatic transmission shown. Manual transmission is similar.
1
WARNING: The gear lever knob will be released suddenly, keep face clear during removal.
Remove the selector lever knob.
- Pull the knob upwards.
2 Release the ride and handling optimization switch assembly.
- Release the 4 clips.
3 Release the selector lever panel.
- Release the 4 clips.
4 Remove the ride and handling optimization switch assembly.
- Disconnect the 2 electrical connectors.
5 Remove the selector lever panel.
Installation
1 Install the selector lever panel.
2 Install the ride and handling optimization switch assembly.
- Connect the electrical connectors.
- Secure the selector lever trim panel.
3
CAUTION: Only fit the selector knob when the selector lever is in the 'P' position.
Install the selector lever knob.
- Engage the locating tang of the knob with the slot in the selector lever.
- Push the knob fully onto the selector lever.