Inspection and Verification

Inspection and Verification
1 Verify the customer concern.
2 Visually inspect for obvious signs of mechanical or electrical damage.
3 Ensure that the sensor face is clear of contamination that could effect the performance of the sensor.





4 If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
5 If the cause is not visually evident, check for Diagnostic Trouble Codes (DTCs) and refer to the DTC Index.

DTC Index
For a list of Diagnostic Trouble Codes (DTCs) that could be logged on this vehicle, please refer to A L L Diagnostic Trouble Codes ( DTC ). For additional information, refer to Diagnostic Trouble Code (DTC) Index - DTC: Module Name: Parking Aid Module Testing and Inspection