Front Bumper: Service and Repair

Front Bumper
This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures How to Use TAS Procedures

Removal

NOTE:
Removal steps in this procedure may contain installation details.

All vehicles

WARNING: Make sure to support the vehicle with axle stands.
1 Raise and support the vehicle.
For additional information, refer to Front Bumper Cover Front Bumper Cover

Vehicles built 10MY upto 11MY









Torque to: 5 Nm

All vehicles





Torque to: 20 Nm

Vehicles built 11MY onwards













Torque to: 9 Nm

All vehicles





Torque to: 2.5 Nm













WARNING: Make sure that new nuts are installed.

NOTE:
With assistance remove the component.

Torque to: 45 Nm

Installation
1 To install, reverse the removal procedure.