Power Trunk / Liftgate Lock Actuator: Service and Repair

Tailgate Latch Actuator

Removal





1 Remove the tailgate upper trim panel.
- Remove the 6 screw covers.
- Remove the 6 screws.
2 Remove the tailgate latch assembly. For additional information, refer to Tailgate Latch Tailgate Latch




3 Remove the tailgate latch actuator.
- Release the access cover.
- Disconnect the electrical connector.
- Remove the bolt.

Installation
1 Install the tailgate latch actuator.
- Tighten the bolt to 25 Nm (18 lb.ft).
- Connect the electrical connector.
- Secure the access cover.
2 Install the tailgate latch assembly. For additional information, refer to Tailgate Latch Tailgate Latch
3 Install the tailgate upper trim panel.
- Install the screws.
- Install the screw covers.