Floor Console Stowage Compartment

Floor Console Stowage Compartment

Removal





1 Remove the floor console stowage compartment.
- Open the floor console stowage compartment lid.
- Remove the 2 screws.
- Using a suitable tool, carefully release the 2 clips.
- Disconnect the cigar lighter electrical connector.




2
NOTE:
Do not disassemble further if the component is removed for access only.
Remove the cigar lighter assembly.
- Remove the cigar lighter.
- With extreme care release the 2 clips and remove the cigar lighter inner housing.
- Remove the cigar lighter housing.

Installation
1 Install the cigar lighter assembly.
2
CAUTION: Make sure the locating tangs are aligned.
Install the floor console stowage compartment.
- Connect the cigar lighter electrical connector.
- Secure the 2 clips.
- Install the 2 screws.
- Close the floor console stowage compartment lid.