Floor Console Stowage Compartment Lid

Floor Console Stowage Compartment Lid

Removal
1 Position the front seats fully forward.
- Reposition both of the front seat backrests for access.




2 Remove the floor console stowage compartment lid LH hinge trim.
- Remove the floor console stowage compartment lid hinge pin LH bolt.




3
CAUTION: Make sure the suitable tool is fully inserted. Failure to follow this instruction may result in damage to the vehicle trim.
NOTE:
Open the floor console stowage compartment lid.
Remove the floor console stowage compartment lid hinge pin.
- Using a suitable tool, remove the floor console stowage compartment lid hinge pin.




4
CAUTION: Do not remove the tool at this stage.
NOTE:
Close the floor console stowage compartment lid.
Remove the floor console stowage compartment lid RH hinge trim.




5
CAUTION: Do not remove the tool at this stage.
NOTE:
Open the floor console stowage compartment lid.
Release the cellular phone handset holder lid damper.
1) Remove the cellular phone handset holder lid damper clevis pin clip.
2) Remove the cellular phone handset holder lid damper clevis pin.




6
CAUTION: Do not remove the tool at this stage.
Release the floor console stowage compartment lid damper.
- Release the cellular phone handset holder from the floor console stowage compartment lid.
- Remove the floor console stowage compartment lid damper screw.




7 Remove the floor console stowage compartment lid.
- Remove the tool.
- Release the floor console stowage compartment lid hinge pin RH sleeve clips.
- Remove the floor console stowage compartment lid hinge pin RH sleeve.

Installation
1
CAUTION: Make sure the suitable tool is fully inserted. Failure to follow this instruction may result in damage to the vehicle trim.
CAUTION: Make sure the cellular phone handset holder is aligned with the floor console stowage compartment lid.
Install the floor console stowage compartment lid.
- Install the floor console stowage compartment lid hinge pin RH sleeve.
- Secure the floor console stowage compartment lid hinge pin RH sleeve clips.
- Using a suitable tool, align the floor console stowage compartment lid.
2
CAUTION: Do not remove the tool at this stage.
Secure the floor console stowage compartment lid damper.
- Install the floor console stowage compartment lid damper screw.
- Secure the cellular phone handset holder to the floor console stowage compartment lid.
3
CAUTION: Do not remove the tool at this stage.
Secure the cellular phone handset holder lid damper.
- Install the cellular phone handset holder lid damper clevis pin.
- Install the cellular phone handset holder lid damper clevis pin clip.
4
CAUTION: Do not remove the tool at this stage.
NOTE:
Close the floor console stowage compartment lid.
Install the floor console stowage compartment lid RH hinge trim.
5
NOTE:
Open the floor console stowage compartment lid.
Install the floor console stowage compartment lid hinge pin.
- Remove the tool.
6
NOTE:
Close the floor console stowage compartment lid.
Install the floor console stowage compartment lid LH hinge trim.
- Install the floor console stowage compartment lid hinge pin LH bolt.
7 Reposition the front seats to their original position.