Overhead Console

Overhead Console

Removal





1 Release the overhead console.
- Open the sunglasses compartment.
- Remove the 2 screws.
- Release the 6 clips.




2 Remove the overhead console.
- Disconnect the 4 electrical connectors.
3
NOTE:
Do not disassemble further if the component is removed for access only.
Remove the front interior lamp.
- Release the 2 clips.




4 Remove the roof opening panel switch.
- Carefully release the 2 clips.
5 Remove the overhead console blanking trim.
- Release the 4 clips.
6 Release the tire pressure monitoring system receiver.
7 Remove the cellular phone microphone.
- Release the 3 clips.




8 Remove the 4 clips from the overhead console.

Installation
1 Install the 4 clips to the overhead console.
2 Install the cellular phone microphone.
- Secure the 3 clips.
3 Secure the tire pressure monitoring system receiver.
4 Install the overhead console blanking trim.
- Secure the 4 clips.
5 Install the roof opening panel switch.
- Secure in the 2 clips.
6 Install the front interior lamp.
- Secure the 2 clips.
7 Install the overhead console.
- Connect the 4 electrical connectors.
8 Secure the overhead console.
- Secure the 6 clips.
- Install the 2 screws.
- Close the sunglasses compartment.