Luggage Compartment Trim

Loadspace Trim Panel

Removal
1 Remove the C-pillar upper trim panel. For additional information, refer to C-Pillar Upper Trim Panel
2 Remove the access panel from the loadspace trim panel.




3 Remove the loadspace securing ring.
- Remove the bolt.
4 Remove the loadspace trim panel.
- Remove the rear seat backrest catch trim panel.
- Remove the 5 clips.
- Disconnect the electrical connector from the interior lamp.
- Disconnect the electrical connector from the accessory socket.

Installation
1 Install the loadspace trim panel.
- Connect the electrical connector to the interior lamp.
- Connect the electrical connector to the accessory socket.
- Secure the 5 clips.
- Install the rear seat backrest catch trim panel.
2 Install the loadspace securing ring.
- Tighten the bolt to 25 Nm (18 lb.ft).
3 Install the access panel to the loadspace trim panel.
4 Install the C-pillar upper trim panel. For additional information, refer to C-Pillar Upper Trim Panel