Lumbar Control Switch

Lumbar Control Switch

Removal

NOTE:
Front seat shown removed for clarity.
1 Position the front seat fully forwards.




2 Remove the safety belt lower anchor bolt cover.
1) Carefully release the clip from behind the front seat base side trim panel.
2) Remove the cover.




3 Carefully release the front seat base side trim panel.
- Remove the 2 screws.
- Release the 6 clips.




4
NOTE:
Safety belt shown removed for clarity.
Disconnect the lumbar control switch electrical connector.




5 Remove the lumbar control switch.
1) Release the 2 clips.
2) Remove the switch.

Installation
1 Install the lumbar control switch.
- Install the switch.
- Secure the 2 clips.
2 Connect the lumbar control switch electrical connector.
3 Carefully install the front seat base side trim panel.
- Secure the 6 clips.
- Install the 2 screws.
4 Install the safety belt lower anchor bolt cover.
5 Reposition the front seat to the original position.