Cooling Fan Belt
Cooling Fan Belt
This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures How to Use TAS Procedures
Removal
1 Disconnect the battery ground cable.
For additional information, refer to Specifications Battery and Charging System
For additional information, refer to Air Cleaner Outlet Pipe T-Connector Air Cleaner Outlet Pipe T-Connector
CAUTION: Always protect the cooling pack elements to prevent accidental damage.
NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.
Special Service Tool
Viscous Coupling Wrench, 303-1142
Special Service Tool
Viscous Coupling Holding Tool, 303-1143
Installation
Install the cooling fan belt.
Special Service Tool
Installer, Stretchy Belt, 303-1500
Whilst rotating the engine, make sure that pressure is applied to the left hand side of the cooling fan belt to aid installation.
Rotate the engine until the special tool has reached the 9 o clock position.
1 Remove the special tool.
2 Rotate the engine clockwise twice, making sure that the belt is seated on both pulleys correctly.
CAUTION: Always protect the cooling pack elements to prevent accidental damage.
NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.
Torque to: 65 Nm
Special Service Tool
Viscous Coupling Wrench, 303-1142
Special Service Tool
Viscous Coupling Holding Tool, 303-1143
For additional information, refer to Air Cleaner Outlet Pipe T-Connector Air Cleaner Outlet Pipe T-Connector
3 Connect the battery ground cable.
For additional information, refer to Specifications Battery and Charging System