Wheels and Tires: Service and Repair

Wheel and Tire

Removal
1
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.




2
NOTE:
Left-hand shown, right-hand similar.
Remove the wheel and tire.
- Remove the 5 nuts.

Installation
1
CAUTION: Apply a small amount of grease to the hub and wheel mating surfaces before installation. Make sure the grease does not come into contact with the vehicles braking components and the wheel stud threads. Failure to follow these instructions may result in personal injury.
To install, reverse the removal procedure.
- Tighten the wheel nuts to 140 Nm (103 lb.ft).