Towing Module: Service and Repair

Trailer Module

Removal
1 Disconnect the battery ground cable. For additional information, refer to Specifications Battery and Charging System
- If the trailer module is to be replaced, use the approved Land Rover diagnostic equipment and follow the on-screen instructions prior to battery disconnection.
2 Remove the access panel from the loadspace trim panel RH.




3 Release the trailer module.
- Remove the 2 nuts.
4 Remove the trailer module.
- Disconnect the electrical connector.

Installation
1 Install the trailer module.
- Connect the electrical connector.
2 Secure the trailer module.
- Install the nuts.
3 Install the access panel to the loadspace trim panel RH.
4 Connect the battery ground cable. For additional information, refer to Specifications Battery and Charging System