Operation CHARM: Car repair manuals for everyone.

Seat Control Switch





Seat Control Switch

Removal

NOTE:
Front seat shown removed for clarity.
1 Position the front seat fully forwards.




2 Remove the safety belt lower anchor bolt cover.
1) Carefully release the clip from behind the front seat base side trim panel.
2) Remove the cover.




3
CAUTION: Release the 2 front clips and the rear clip before releasing the 3 fir tree clips. Failure to follow this instruction may result in damage to the vehicle.
Carefully release the front seat base side trim panel.
- Remove the 2 screws.
- Release the 2 front clips.
- Release the rear clip.
- Release the 3 fir tree clips.




4
NOTE:
Safety belt shown removed for clarity.
Release the seat control switch.
- Release the 5 clips.




5
NOTE:
Safety belt shown removed for clarity.
Remove the seat control switch.
- Disconnect the 5 electrical connectors.

Installation
1 Install the seat control switch.
- Connect the 5 electrical connectors.
2 Secure the seat control switch.
- Secure the 5 clips.
3 Secure the front seat base side trim panel.
- Secure the 6 clips.
- Install the 2 screws.
4 Install the safety belt lower anchor bolt cover.
5 Reposition the front seat to the original position.