Ambient Temperature Sensor / Switch HVAC: Service and Repair

Ambient Air Temperature Sensor

Removal
1 Disconnect the battery ground cable. For additional information, refer to Specifications Battery and Charging System
2 Remove the front door trim panel. For additional information, refer to Front Door Trim Panel Service and Repair




3 Release the window surround trim panel.




4 Remove the exterior mirror.
- Remove the 3 Torx screws.
- Disconnect the electrical connector.

Installation





1 Install the exterior mirror.
- Tighten the Torx screws to 8 Nm (6 lb.ft).
- Connect the electrical connector.




2 Secure the window surround trim panel.
3 Install the front door trim panel. For additional information, refer to Front Door Trim Panel Service and Repair
4 Connect the battery ground cable. For additional information, refer to Specifications Battery and Charging System