Removal and Replacement

Battery
This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures How to Use TAS Procedures

Removal

NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.

NOTE:
Removal steps in this procedure may contain installation details.

All vehicles
For additional information, refer to Specifications Battery and Charging System
For additional information, refer to Engine Control Module (ECM)





NOTE:
RHD illustration shown, LHD is similar.





NOTE:
RHD illustration shown, LHD is similar.

NOTE:
Disconnect the ground cable first.

Torque to: 6 Nm





NOTE:
LHD illustration shown, RHD is similar.

Right-hand drive vehicles





Torque to: 9 Nm

Left-hand drive vehicles





CAUTION: Make sure the component is aligned as shown.

All vehicles





CAUTION: Make sure that the battery monitoring system (BMS) module wiring harness does not get caught beneath the battery securing clamp.

CAUTION: Make sure that the battery is positioned fully outboard on the battery tray and that no harnesses or hoses are trapped before securing the battery with the bolts.

NOTE:
RHD illustration shown, LHD is similar.

Installation

NOTE:
To install, reverse the removal sequence.
For additional information, refer to Specifications Battery and Charging System