Front Wheel Bearing And Wheel Hub [Vehicles With: High Performance Brakes]

Front Wheel Bearing and Wheel Hub
This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures How to Use TAS Procedures

Removal

NOTE:
RH illustration shown, LH is similar.

WARNING: Make sure to support the vehicle with axle stands.
1 Raise and support the vehicle.
2 Remove the wheel and tire.
For additional information, refer to Wheel Knuckle - Vehicles With: High Performance Brakes Wheel Knuckle [Vehicles With: High Performance Brakes]









Special Service Tool




Remover, Front and Rear Hub and Bearing, 204-509-05





Special Service Tool




Adaptor, Front and Rear Hub and Bearing, 204-509-01





Special Service Tool




Remover, Front and Rear Hub and Bearing, 204-509-02

Special Service Tool




Adaptor, Front and Rear Hub and Bearing, 204-509-04





Special Service Tool




Remover, Puller, 100-005A








3 Remove the special tools.









Special Service Tool




Remover, Front and Rear Hub and Bearing, 204-509-06













Special Service Tool




Remover, Bearing/Gear, 205-310

Special Service Tool




Remover, Bearing/Gear, 205-311

Special Service Tool




Adaptor, Differential Bearing Remover, 307-468-03

Installation





Using a hydraulic press, install the wheel bearing into the wheel knuckle assembly.
Special Service Tool




Installer, Front and Rear Hub and Bearing, 204-509-12

Special Service Tool




Adaptor, Front and Rear Hub and Bearing, 204-509-10








Using a hydraulic press, install the wheel hub into the wheel bearing.
Special Service Tool




Adaptor, Front and Rear Hub and Bearing, 204-509-11





Torque to: 15 Nm
For additional information, refer to Wheel Knuckle - Vehicles With: High Performance Brakes Wheel Knuckle [Vehicles With: High Performance Brakes]
Install the wheel and tire.
Tighten the wheel nuts to 140 Nm (103 lb.ft).