Rear Suspension

Wheel Bearing and Wheel Hub

Special Service Tools






Remover

204-509-1(LRT-60-033/1)





Remover

204-509-2(LRT-60-033/2)





Remover

204-509-3(LRT-60-033/5)





Remover

204-509-4(LRT-60-033/6)





Remover 2 off

204-509-6(LRT-60-033/8)





Remover

204-509-7(LRT-60-033/9)





Rear wheel bearing remover/installer

204-509/10(LRT-60-033/10)





Installer

204-509-9(LRT-60-033/11)





Installer 204-509-8

(LRT-60-033/12)

Removal
1
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
2 Remove the rear wheels and tires
3 Remove the wheel knuckle. For additional information, refer to Wheel Knuckle Service and Repair




4 Release the brake disc shield.
- Remove the 4 bolts.




5
NOTE:
The bearing track will remain on the wheel hub.
Using the special tools, remove the wheel hub.




6 Remove the brake disc shield.
7 Remove the special tools.




8 Using the special tools, press out the rear wheel bearing.
- Remove and discard the circlip.




9 Using a bearing separator and the special tool, remove the rear wheel bearing inner track.

Installation





1 Using the special tools, install the rear wheel bearing.
- Clean the component mating faces.
- Install a new circlip.
2 Install the brake disc shield.
- Clean the component mating faces.
- Tighten the M8 bolts to 25 Nm (18 lb.ft).
- Tighten the M6 bolts to 10 Nm (7 lb.ft).




3 Using the special tools, press the wheel hub into the rear wheel bearing.
- Clean the component mating faces.
4 Install the wheel knuckle. For additional information, refer to Wheel Knuckle Service and Repair
5 Install the wheels and tires.
- Tighten the wheel nuts to 140 Nm (103 lb.ft).