Suspension - Revised Air Suspension Calibration

NO.: LTB00091

ISSUE: 2

DATE: 04 MAY 2009

ISSUE '2' CHANGES ARE HIGHLIGHTED WITH GRAY BACKGROUND

SECTION: 204

Air Suspension - Calibration Procedure and Labor Time Changes





AFFECTED VEHICLE RANGE

CONDITION SUMMARY:

NEW WORKSHOP PROCEDURE FOR AIR SUSPENSION CALIBRATION

Due to a change in procedure, a new calibration process has been issued. If calibration of the air suspension system is necessary, refer to the new procedure outlined below.

TOOLS:

NOTE:
Retailers currently have special tool 204-557 or 204-557A. Land Rover has recently released a free of charge tool, 204-557A_U, to make up tool kit 204-557B. Refer to Service Bulletin STE07-06.

Latest IDS DVD; software first available on IDS DVD 109
204-557B ................Ride Height Gauge





WARRANTY:

NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always refer to DDW to obtain the latest repair time.

DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.

REPAIR PROCEDURE

NOTE:
Global Technical Reference (GTR) lookup sequence is as follows: GTR Home > NAS > Chassis > Suspension > Vehicle Dynamic Suspension: Ride Height Adjustments"

1. Refer to Global Technical Reference GTR Workshop Manual, section 204-05 - Ride Height Adjustments (60.90.03), and calibrate the air suspension system.