Wiper Motor: Service and Repair

Rear Window Wiper Motor

Removal
1 Remove the rear window wiper pivot arm. For additional information, refer to Rear Window Wiper Pivot Arm Service and Repair




2 Disconnect the rear window washer hose from the rear window wiper motor.
3 Disconnect the 2 electrical connectors from the rear window wiper motor.
4 Remove the 3 bolts securing the rear window wiper motor to the liftgate.
5 Remove the rear window wiper motor from the liftgate window glass seal.
6
NOTE:
Do not disassemble further if the component is removed for access only.
Remove the rear window wiper motor seal from the liftgate window glass.
7 Remove the 3 compression limiters from the rear window wiper motor mountings.
- Release and collect the 3 mountings from the rear window wiper motor.

Installation
1 Install the mountings and insert the compression limiters to the rear window wiper motor.
2 Install a new rear window wiper motor to the liftgate window glass seal.
3 Install the rear window wiper motor.
- Tighten the bolts to 10 Nm (7 lb.ft).
4 Connect the electrical connectors to the rear window wiper motor.
5 Connect the rear window washer hose to the rear window wiper motor.
6 Install the rear window wiper pivot arm. For additional information, refer to Rear Window Wiper Pivot Arm Service and Repair