Surround Camera System - Overlay Harness Installation
LTB00367NAS325 JAN 2012
ISSUE '3' CHANGES ARE HIGHLIGHTED IN GRAY
SECTION: 418
Surround Camera System Coax Harness Overlay Installation
AFFECTED VEHICLE RANGE:
CONDITION SUMMARY:
Situation:
On vehicles fitted with the Surround Camera System (not vehicles fitted with Parking Aid - Rear View Camera only), the camera image may be lost and a blue screen is displayed. This may be caused by signal loss from poor connections, harness routing and excessive bending, the harness being tightly clamped, and damage to the insulation.
NOTE
PARTS:
TOOLS:
Refer to Workshop Manual for any required special tools
WARRANTY:
NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always refer to DDW to obtain the latest repair time.
DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
Normal Warranty policies and procedures apply
REPAIR PROCEDURE
INSTALL SURROUND CAMERA SYSTEM PARKING AID COAX OVERLAY HARNESS
1. Refer to Workshop Manual, section 418-02: wiring Harnesses, and replace the affected Parking Aid camera wiring harness(es).
Disclaimer