Wheel and Tire System Inspection

INSPECTION
1. Inspect tires.
a. Check the tires for wear and for the proper inflation pressure.

Tire size: P275/70R 16
Front: 220 kPa (32 psi)
Rear: 220 kPa (32 psi)

b. Check the tire runout.

Tire runout: 3.0 mm (0.118 inch) or less.





2. Rotate tires.

HINT: See the illustration for where to rotate each tire.





3. Inspect wheel balance.
a. Check and adjust the off-the-car balance.
b. If necessary, check and adjust the on-the-car balance.

Unbalance after adjustment: 13.0 grams (0.029 lbs.) or less

4. Check wheel bearing looseness. There should be no backlash in the bearing shaft direction.
5. Check front suspension for looseness.
6. Check steering linkage for looseness.
7. Check ball joint for looseness.
8. Check shock absorber works properly.
a. Check for oil leaks
b. Check mounting bushings for wear
c. Bounce front and rear of the vehicle