Preparation For Disassembly

1. Remove drive plate.
Uniformly loosen and remove the drive plate bolts, in several passes, in the sequence shown.
2. Install engine to engine stand for disassembly.
3. Remove cylinder head.
4. Remove timing chain and gears.
5. Remove oil filter.





6. Remove oil filter union.





7. Remove knock sensors.
Using Special Service Tool (SST) Oil Pressure Switch Socket # 09816 - 30010 or equivalent, remove the 2 knock sensors.





8. Remove Power Steering (PS) pump.
(a) Remove the 2 nuts and pump.
(b) Remove the O-ring from the pump.





9. Remove RH engine mounting bracket.
(a) Remove the nut and insulator.
(b) Remove the 4 bolts and bracket.





10. Remove LH engine mounting bracket.
(a) Remove the nut and insulator.
(b) Remove the 4 bolts and bracket.





11. Remove oil cooler cover and oil cooler.
Remove the 10 bolts, 2 nuts, oil cooler cover with the oil cooler and gasket.