Daytime Running Lamp Relay: Testing and Inspection

Terminal Identification:

Reference:

INSPECT DAYTIME RUNNING LIGHT RELAY CIRCUIT
Disconnect the connector from the relay and inspect the connector on the wire harness side.
If circuit is as specified, perform the following inspections.

Terminal Identification:

Reference:

INSPECT DAYTIME RUNNING LIGHT RELAY No.3 and No.4 CONTINUITY
If continuity is not as specified, replace the relay.

Terminal Identification:

Reference:

INSPECT DAYTIME RUNNING LIGHT RELAY No.3 AND No.4 CIRCUIT
If the circuit is not as specified, inspect the circuits connected to other parts.








INSPECT DAYTIME RUNNING LIGHT RELAY No.2 CONTINUITY
If continuity is not as specified, replace the relay.