Operation CHARM: Car repair manuals for everyone.

Fuel Cut RPM Inspection

1. WARM UP ENGINE
Allow the engine to warm up to normal operating temperature.
2. CONNECT LEXUS HAND-HELD TESTER OR OBD II SCAN TOOL
(a) Remove the fuse cover on the instrument panel.





(b) Connect the LEXUS hand-held tester or OBD II scan tool to the DLC3.
(c) Please refer to the LEXUS hand-held tester or OBD II scan tool operator's manual for further details.
3. INSPECT FUEL CUT OFF RPM
(a) Increase the engine speed to at least 3,500 rpm.





(b) Use a sound scope to check for injector operating noise.
(c) Check that when the throttle lever is released, injector operation noise stops momentarily and then resumes.

HINT: Measure with the A/C OFF.

Fuel return rpm: 1,200 rpm

4. DISCONNECT LEXUS HAND-HELD TESTER OR OBD II SCAN TOOL