Speed Sensor, Front

Front Speed Sensor Components:

FRONT SPEED SENSOR

REMOVAL

NOTE: When replacing the sensor or sensor harness, replace the sensor and sensor harness together as a set.

Disconnect Speed Sensor Connector:

1. Disconnect Speed Sensor connector.
2. Remove Speed Sensor.
(a) Remove the 8 clamp bolts holding the sensor harness from the axle housing.
(b) Remove the bolt and wire tie holding the sensor harness from the stabilizer bar.
(c) Remove the bolt and 2 clips holding the sensor harness from the frame and body.
(d) Remove the 2 installation bolts and Speed Sensors from the Steering Knuckle.
Torque: 18 Nm (13 ft. lbs.)

INSTALLATION
Installation is in the reverse order of removal.

NOTE: After installation, check Speed Sensor signal.