Component Tests and General Diagnostics

Terminal Identification:

Reference:

1. INSPECT IGNITION SWITCH CONTINUITY
If continuity is not as specified, replace the switch.

Terminal Identification:

Reference:

2. INSPECT IGNITION SWITCH CIRCUIT
Connect the switch connector and inspect the connector on wire harness side from the back side, as shown.
If circuit is not as specified, inspect the circuits connected to other parts.

Terminal Identification:

Reference:

3. INSPECT KEY UNLOCK WARNING SWITCH CONTINUITY
If continuity is not as specified, replace the switch.

Terminal Identification:

Reference:

4. INSPECT KEY UNLOCK WARNING SWITCH CIRCUIT
Connect the switch connector and inspect the connector on the wire harness side from the back side, as shown.
If continuity is not as specified, inspect the circuit connected to other parts.

5. INSPECT DOOR COURTESY SWITCH CONTINUITY
Refer to Lighting and Horns