D. Precautions

1. Use 3M Ultra Pro body sealer on the ends of the eight (T30) Support Bolts and make sure the white rubber sealing sleeves are in place.

Torque (T30): 65 inch pounds (7.3 Nm)

2. Make certain the Screws holding the Rear Supports to the Rails are snug and the bottom surfaces of the Rails and Supports are flush with one another.

3. When reinstalling the Support Covers, make sure they are fully seated by giving each a light blow with a closed fist. The top surface of each Cover should be flush with the surface of each Side Rail.